 ( PU) 4018 T. C.png)
Cabin Mounting
Leaf-type and round PU cabin mounts for Signa, 709 and 4018 cabins that cut road shock reaching the driver.
Explore
Manufacturer & Wholesaler • New Delhi, India
Truck Rubber Parts Manufacturer for Commercial Vehicles, Tractors & Utility Fleets
Since 1980, Amit Rubber Products has moulded and supplied centre bearing assemblies, radiator and turbo hoses, engine and cabin mountings, balance rod bushes and polyurethane bushes for Tata, Ashok Leyland, Mahindra Bolero, Marcopolo bus, tractor and combine applications. Distributors, workshops and fleet buyers source from us for consistent fitment, durable compounds and fast dispatch from Delhi.
1980Established in Delhi, India
46+Years of rubber moulding experience
20+Countries served by our customers
12Core product families in stock
Core Product Lines
Driveline, Cooling & Mounting Components Built for Heavy Loads
Each family below is produced in multiple OE-reference variants. Share your part number or sample and our team will confirm the exact match before dispatch.
Driveline
Centre Bearing Assembly (Drive Shaft Center Support Bearing)
A centre bearing assembly supports the middle of a two-piece propeller shaft on rear-wheel-drive and 4WD vehicles. It keeps the shaft aligned, lets it rotate smoothly and isolates driveline vibration from the chassis.
- ConstructionSealed ball bearing + moulded rubber cushion + pressed steel bracket
- FunctionSmooth shaft rotation, vibration absorption, secure chassis fixing
- Ref. numbers88507, 88508, 88509, 88511, 88512, 2518/6013, 3118, 4018, 6211 (2416)
- FitsTata 407 / 709 / 2518 / 3118 / 4018, Ashok Leyland U-Truck, Mahindra Bolero
.png)
.png)
Cooling System
Radiator Hose & Coolant Hose Pipes
Radiator hoses carry the coolant (antifreeze and water mix) between the radiator and the engine water pump, maintaining continuous circulation that prevents engine overheating under load.
- MaterialEPDM rubber with excellent heat and coolant resistance; polyester or nylon reinforcement for burst strength
- TemperatureDesigned for approx. -40 °C to 125 °C service with engine vibration
- DesignFlexible yet durable to absorb engine movement and pressure changes; clamp-secured ends
- FitsTata trucks, Ashok Leyland, tractors, combines, Bolero kits
Air Intake
Red Rubber Turbo Hose & Hump Hose Pipes
Turbo and hump hoses connect the turbocharger, intercooler and intake manifold. Their convoluted or humped profile absorbs engine rocking and thermal expansion while holding boost pressure.
3" & 4" hump hose5" turbo hose6" finger hoseDholki hose (Leyland)Tata 2515 / Signa
Turbo Hose Pipes Hump & Silicone Hoses 
.png)
Powertrain Mounting
Front Engine Mounting
Engine mountings carry the static weight of the engine and absorb torque reaction during acceleration and braking. A correctly bonded rubber-to-metal mount reduces cab vibration, protects brackets and extends the life of hoses and linkages.
- ConstructionSteel plates bonded to vibration-damping rubber, ready-to-fit bolt pattern
- Variants2515 T.C. (16 mm), 1613 T.C., 608, Tata 407 / 709, Leyland U-Truck
- Replace whenRubber cracks or separates, engine shudder at idle, clunk on take-off
Chassis & Suspension
High-Demand Suspension and Cabin Components
Fast-moving wear parts that fleets replace most often — available in natural rubber and polyurethane compounds.
Balance Rod Bush
Balance rod and cut bushes for Marcopolo 1109, Prima and Leyland BS-III, in rubber or PU 2416 sets.
Explore
Fifth Wheel Bush
New-model 55 mm fifth wheel bushes that restore smooth articulation between tractor head and trailer.
Explore.png)
Gear Cover Boot
Heavy-duty, zip-type and rexine gear lever boots that seal the cab floor against dust, heat and noise.
Explore About Amit Rubber Products
Four Decades of Automotive Rubber Experience from Delhi
Established in 1980 in Delhi, Amit Rubber Products manufactures and wholesales rubber components — radiator hoses, engine mountings, centre bearing assemblies and rubber bushes — for Tata trucks, Ashok Leyland, Bolero jeeps, tractors and combine harvesters.
We are recognised as a manufacturer and wholesaler of rubber bushes, centre bearings and rubber-based components engineered for long service life and strong resistance to wear and tear. Every part is produced from premium-grade raw materials using controlled moulding processes and is inspected before it leaves our facility.
Led by Mr. Amit Chitkara, our team works directly with distributors, workshops and fleet maintenance buyers, so technical questions about fitment, compound or packing are answered by people who make the parts.
- Manufacturer, not a trading middleman
- Rubber & polyurethane compounds
- Custom parts to drawing or sample
- Pre-dispatch quality inspection
Since 1980Kashmere Gate, New Delhi
Why Choose Us
Why Global Buyers Choose Amit Rubber Products
Reliable fitment, sensible factory pricing and responsive support — the three things replacement-parts buyers tell us matter most.
High Quality
Premium raw materials and controlled moulding deliver consistent hardness, bonding strength and dimensions batch after batch.
Competitive Factory Pricing
Efficient in-house production lets us offer competitive prices to distributors without compromising on compound quality.
Effective Service
Prompt replies, accurate part identification and on-time dispatch keep your shelves stocked and your fleet moving.
Professional Factory
46+ years of rubber and polyurethane moulding experience.
Customer Trust
Efficient after-sales service for buyers in 20+ countries.
Quality Control
Every batch checked for fitment, finish and bonding before packing.
Full Catalogue Snapshot
Our Range of High-Performance Rubber Products
A selection of additional variants we manufacture and keep in stock for regular replacement demand.
.png)
.png)
.png)
 ddddddd.png)
.png)
dvd.png)
.png)
Application Scenarios
Where Our Rubber Components Work
From long-haul trucks to farm machinery, our parts are matched to the load cycles and road conditions of each application.
Heavy Commercial Trucks
Centre bearings, engine & cabin mounts
Light Commercial Vehicles
Hoses & mountings for 407 / 709 / Ace
Utility & Off-Road
Bolero drive shaft & radiator kits
Tractors & Combines
Coolant hoses for farm machinery
Buses & Trailers
Balance rod, york & fifth wheel bushes
Sourcing Rubber Parts from India?
Send us your part list by email or phone. Our team reviews every request personally and replies with fitment confirmation and availability.
- Contact PersonMr. Amit Chitkara
- Email[email protected]
- Phone / WhatsApp+91-9871861285
- Address404/405/12, Rajan Kalan, Kashmere Gate, New Delhi-110006, India
What to Include for the Fastest Reply
Accurate details let us match the right compound and dimensions on the first attempt and avoid costly returns.
1Part ReferenceOE or reference number (e.g. 88509, 2518/6013, 4018).
2Vehicle DetailsMake, model, year and engine or axle variant.
3Photos & SizeClear photos plus ID, OD, length or bolt pattern.
4Quantity & DeliveryRequired volume, packing needs and preferred dispatch mode.
OE brand names and part numbers are used for identification and reference only. Amit Rubber Products manufactures replacement parts.
Buyer's Knowledge Base
Spare Parts Supply & Technical Guidance
How we supply replacement rubber parts — and practical know-how to help your workshop choose and stock them correctly.
Quality-Checked Spare Parts
To keep your equipment at peak performance, we supply only quality-checked parts. Each batch is inspected for dimensional accuracy, rubber-to-metal bonding and surface finish, ensuring compatibility and reliability on your vehicles.
Fast, Reliable Dispatch
Downtime costs money. Streamlined order handling and organised stock allow us to pack and dispatch orders quickly, so distributors can restock and fleets can return vehicles to the road sooner.
Immediate Shipment of Stocked Items
As soon as we confirm that available parts match your requirement, we ship them promptly rather than waiting for a full order to be completed — minimising the time your equipment stays off-line.
Premier Parcel & Express Delivery
All spare parts are dispatched through trusted premier parcel services. Standard, express or special delivery is available at the customer's discretion, so you can align logistics with your operational timeline.
High Availability of Spare Parts
We maintain an extensive inventory across centre bearings, hoses, mountings and bushes. High availability means fewer back-orders, fewer partial shipments and fewer interruptions to your sales or maintenance schedule.
Recommendations for Stock Holding
Beyond supply, we advise distributors on which fast-moving references to hold for their market — typically centre bearings, engine mounts and radiator hoses for the most common truck platforms — to prevent unplanned stock-outs.
Safe & Reliable Part Identification
Choosing the correct part is critical. We cross-check part numbers, photos and measurements against our references before dispatch, minimising errors and ensuring a safe, reliable fit on the first installation.
Signs of a Worn Centre Bearing
Typical symptoms include vibration that rises with road speed, a clunk when pulling away, squealing from under the cab and a cracked or sagging rubber cushion. Replacing the assembly early protects universal joints and gearbox seals.
Rubber vs. Polyurethane Bushes
Rubber bushes give better noise and vibration isolation, close to OE comfort. Polyurethane bushes are firmer and resist oil, abrasion and tearing, making them a strong choice for overloaded or rough-road fleets seeking longer intervals.
FAQ
Frequently Asked Questions from Importers
Which vehicles are your rubber parts designed for?
Our range covers Tata trucks (407, 709, 1613, 2515, 2518, 3118, 4018, Signa and Prima platforms), Ashok Leyland trucks including U-Truck and BS-III models, Mahindra Bolero utility vehicles, Marcopolo buses, trailers, tractors and combine harvesters. OE names and numbers are used for reference only.
Can you manufacture rubber bushes and hoses to my drawing or sample?
Yes. We regularly customise rubber bushes, polyurethane bushes and hose pipes to customer drawings, physical samples or OE reference numbers, including specific hardness, dimensions and colour.
Should I choose a rubber bush or a polyurethane (PU) bush?
Natural rubber bushes offer better vibration and noise isolation and are closest to OE ride comfort. Polyurethane bushes are firmer and more resistant to oil, abrasion and tearing, which makes them suitable for heavily loaded or rough-road fleets that need longer replacement intervals.
What information do you need to identify the correct spare part?
Please share the OE or reference part number, vehicle make, model and year, clear photos of the old part and key dimensions such as inner diameter, outer diameter, length and bolt pattern. This allows us to confirm fitment before dispatch.
Do you supply overseas buyers?
Yes. We serve distributors and fleet buyers in more than 20 countries and dispatch through premier parcel and express services, with standard, express or special delivery available at the customer's discretion.
Testimonials
What Our Clients Say
Our Key Customers
Trusted by automotive distributors, workshops and fleet operators.
